2013 Volkswagen Jetta Hybrid - Fuses (3 pages)

Posted on 10 Feb, 2015 by Muitosabao
Model: 2013 Volkswagen Jetta Hybrid
File size: 0.11 MB


Other 2013 Volkswagen Jetta Hybrid Manuals:


Download manual 2013 Volkswagen Jetta Hybrid

Manual Description
In this section you'll find information about, due to ongoing development of the vehicle, configuration-dependent allocation fuses, combined fuse protection of multiple loads with one fuse, an up-to-date overview fuse location, per load is not possible at the time of printing.

Available from authorized Volkswagen dealers and authorized Volkswagen Service Facilities, in general, one fuse can protect several loads, find out why the fuse blew and correct the problem before replacing a blown fuse, fuse blows again after a short time, the electrical system should be checked by an authorized.

Volkswagen dealer or an authorized Volkswagen Service Facility, preparations for working engine compartment, high voltage systems in the engine compartment can cause electrical shocks, severe burns, avoid short circuits electrical system.

Using the wrong fuse, using a blown fuse that has been repaired, and using metal objects, place of fuses to complete the electrical connection in the circuit can cause fires serious, never replace a fuse with one that has a higher amp rating, a fuse of the same amperage (same color and same imprint) same overall size.

Never replace fuses with a metal strip, a paper clip, similar object, to help prevent damage to the electrical system, switch off all lights accessories, switch off the ignition, and remove the key from the ignition switch before replacing fuse, open fuse boxes must be protected from dirt and moisture.

Can cause damage electrical system,  Please first read and note the introductory information heed WARNINGS, replace a blown fuse only with a fuse of the same amperage (same color same imprint), opening the fuse box instrument panel.

Pull the lower part of the cover in the direction of the arrow ⇒ fig, to install, guide the cover from the bottom into the instrument panel and push direction, opposite to the arrow until you can hear it latch into place, opening the fuse box engine compartment.

Move the release tabs in the direction of the arrows ⇒ fig, to install push the cover onto the fuse box, to help prevent vehicle damage, be careful when removing fuse box covers be sure, the vehicle contains other fuses in addition to those mentioned in this section.

Replaced by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility, there are plastic tweezers for removing fuses on the inside of the fuse box cover...

Use of Cookies    About    Contact us
All marks are the property of their respective holders