Download manual 2014 Volkswagen EOSManual Description
In this section you'll find information about, due to ongoing development of the vehicle, configuration-dependent allocation fuses, combined fuse protection of multiple loads with one fuse, an up-to-date overview fuse location, per load is not possible at the time of printing.
Available from authorized Volkswagen dealers and authorized Volkswagen Service Facilities, in general, one fuse can protect several loads, find out why the fuse blew and correct the problem before replacing a blown fuse, fuse blows again after a short time, the electrical system should be checked by an authorized.
Volkswagen dealer or an authorized Volkswagen Service Facility, working in the engine compartment, Working engine compartment, high voltage systems in the engine compartment can cause electrical shocks, severe burns, avoid short circuits electrical system.
Using the wrong fuse, using a blown fuse that has been repaired, and using metal objects, place of fuses to complete the electrical connection in the circuit can cause fires serious, never replace a fuse with one that has a higher amp rating, a fuse of the same amperage (same color and same imprint) same overall size.
Never replace fuses with a metal strip, a paper clip, similar object, to help prevent damage to the electrical system, switch off all lights accessories, switch off the ignition, and remove the key from the ignition switch before replacing fuse, open fuse boxes must be protected from dirt and moisture.
Can cause damage electrical system, Please first read and note the introductory information heed WARNINGS, replace a blown fuse only with a fuse of the same amperage (same color same imprint), opening the fuse box instrument panel.
Insert a flat object, such as a screwdriver from the vehicle tool kit, into opening ⇒ fig, (magnified view) and carefully lift off cover, to install, guide the cover from the bottom into the instrument panel and push until you can hear it, opening the fuse box engine compartment.
Open the engine hood , Working engine compartment, move the release buttons in the direction of the arrows ⇒ fig, to install, place the cover on the fuse box, arrows until they latch with an audible click”.
To help prevent vehicle damage, be careful when removing fuse box covers be sure, the vehicle contains other fuses in addition to those mentioned in this section, replaced by an authorized Volkswagen dealer or an authorized Volkswagen Service Facility, switch off the headlights, the ignition, all electrical consumers.
Open the appropriate fuse box, Fuses vehicle, a blown fuse can be recognized by the burned metal strip ⇒ fig, shine a flashlight on the fuse, if needed, remove the plastic tweezers ⇒ fig.
For small fuses, slide the tweezers ⇒ fig, for larger fuses, slide the tweezers (1) onto the fuse side B, if the fuse is blown, replace the fuse with a new fuse of the same amperage (same color same, imprint) and same overall size ⇒ .
If necessary, replace the plastic tweezers in fuse box cover, if a fuse is replaced with a fuse with higher amperage, then damage can occur various...