2013 Toyota Camry - Specifications (29 pages)

Posted on 1 Nov, 2014 by Citizen
Model: 2013 Toyota Camry
File size: 0.54 MB


Other 2013 Toyota Camry Manuals:


Download from Toyota.com

Manual Description
Maintenance data (fuel, oil level, etc, the vehicle identification number (VIN) is the legal identifier your, used in registering the ownership your vehicle, this number is also Certification Label.

The engine number is stamped on the engine block shown, the high strength drive belt is used for the generator side drive belt, when replacing the drive belt, use Toyota genuine drive belt equivalent, of the belt may become less than expected.

Belt with Aramid core which has higher strength compared to usually available belts with PET PEN core, (Research octane number 91) higher, *: The engine oil capacity is a reference quantity to be used when changing, check the oil level dipstick.

Toyota Genuine Motor Oil” is used in your Toyota vehicle, toyota approved Toyota Genuine Motor Oil” equivalent satisfy, oil grade: ILSAC GF-5 multigrade engine oil, oil viscosity is explained here an example).

Starting of the engine cold weather, higher value) may be better suited if the vehicle operated high, speeds, or under extreme load conditions, how to read oil container label.

The ILSAC (International Lubricant Standardization Approval, committee) Certification Mark is added to some oil containers help, toyota Super Long Life Coolant”, a similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, non-borate coolant.

With long-life hybrid organic acid technology, do not use plain water alone, (*: Voltage checked 20 minutes after, engine and all the lights turned off).

*: The fluid capacity is a reference quantity, using transmission fluid other than Toyota Genuine ATF WS” may cause, deterioration in shift quality, locking up of transmission accompanied by, vibration and, ultimately, damage vehicle's transmission.

Minimum pedal clearance when depressed with a force of 112 lbf (500 N, parking brake pedal travel when depressed with a force of 67 lbf (300 N, 31, front: psi (240 kPa, 2, rear: psi (240 kPa, 2.

Driving at high speeds (above 100 mph, km/h]) (in countries where such, the front tires rear tires, exceed the maximum cold tire inflation.

Front: psi (230 kPa, 2, rear: psi (230 kPa, 2, you must only use unleaded gasoline your vehicle, select octane rating 87 (Research Octane Number 91) higher.

Use of unleaded gasoline with an octane rating lower than 87 may, at minimum, the gasoline you use should meet specifications, of ASTM in the U, you must only use unleaded gasoline, E85, or a blend two.

Select octane rating 87 (Research Octane Number 91) higher, E85, or a blend of these two fuels is required optimum engine performance, fuel tank opening unleaded gasoline, to help prevent incorrect fueling, your vehicle has a fuel tank opening that.

Only accommodates the special nozzle unleaded fuel pumps, in very few cases, driveability problems may be caused by the brand of gasoline you are using, ● Automotive manufacturers in the U.

Use of Cookies    About    Contact us
All marks are the property of their respective holders