Manual Description The pedal crank here must be placed in the pedal crank recess opening as shown in the illustration. Insert pedal crank mount into outer rail of each pedal crank recess from above and slide downwards until at least underneath the notching. The settings for the wheel recesses and on the rotary lever on the pedal crank recess should be noted and saved for each bicycle.
Lift cover at the rear and push it upwards out of the side guides at the front. Pull out the hook at the left sidewall of the load compartment to hold the rear floor cover upright. Follow the installation instructions and remove the roof rack when not in use.
Washer fluid is sprayed sensor onto the windscreen and the wiper wipes a few times. Additionally the power outlets are deactivated in the event of low battery voltage. Turn the adjuster wheel to highlight a menu option or to set a numeric value.