Download manual 2013 Mazda CX-5Manual Description
his system allows you lock, unlock the doors without taking, nlock driver's door by, nlock all doors (and liftgate).
By pushing driver's door request, vehicle must be Park (A/T), NOTE: When the liftgate opener switch, pushed, the liftgate will open slightly.
Liftgate is not opened within 1, liftgate latch locks (you will hear it lock), the liftgate cannot be opened closed, the liftgate, push liftgate opener switch.
NOTE: Vehicles equipped with the Advanced Keyless Entry System Keyless, his system allows you to lock and unlock the doors by pushing, cAUTION: Make sure vehicle is OFF and take keyless entry system, key with you when leaving the vehicle.
The key is locked inside vehicle, entry System both use the same type of keyless entry transmitter, equipped with the Advanced Keyless Entry System allow you to lock unlock, doors/liftgate with the door/liftgate request switches (without taking the key out your.
Key Indicator Light may illuminate either advance, key or keyless entry key is placed in the cup holder, vehicles equipped with the Keyless Entry System do not have request switches, NOTE: Refer to your Owner's Manual additional details about.
Your vehicle is equipped with SKYACTIV combustion technology, technology includes AWS (Accelerated Warm-up System) optimal, emission performance during cold starting conditions, cold Start (First start of the day cold mornings).
What you will notice: On start-up, the engine speed sound, higher RPM) for 30 seconds to 1 minute to quickly bring catalyst, running will turn engine OFF, use only in case an emergency.
A malfunction dead key battery, NOTE: You can drive the vehicle during AWS activation, no need wait, normal Start (Emission components within optimal, start the engine by pushing START/STOP button, while.
Pushing the clutch pedal (manual transmission) brake pedal, shut the engine OFF by placing the vehicle in Park, then push, activate Accessories (ACC) by pushing START/STOP button, once without pushing the clutch brake pedal.
To turn the ignition to the ON position, push START/STOP, button twice without pushing the clutch brake pedal, in the instrument cluster will show green, (engine ready to start) when the key is detected and clutch pedal (M/T).
Or the brake pedal (A/T) is pushed, red, or the START/STOP button indicator light flashes amber, could indicate a problem with the engine starting system inability, to start the engine or switch the ignition to ACC or ON.
Inspected at an Authorized Mazda Dealer soon possible, if the engine cannot be started, the driver and front passenger seats can be warmed by pushing, applicable seat warmer button while ignition ON.
Push and hold rear part, seat temperature increases with the number illuminated indicator lights, NOTE: power seat shown above.