2013 Lexus GS350 - Do-it-yourself maintenance (68 pages)

Posted on 3 Nov, 2014 by Prevenge
Model: 2013 Lexus GS350
File size: 5.71 MB


Other 2013 Lexus GS350 Manuals:


Download from Lexus.com

Manual Description
If you perform maintenance by yourself, be sure follow correct, procedure as given these sections, funnel (used only adding brake, toyota Super Long Life Coolant”.

A similar high quality ethylene glycolbased non-silicate, non-amine, nonnitrite non-borate coolant with, funnel (used only adding coolant), funnel (used only adding engine, fuse with same amperage rating.

Bulb with same number wattage, water or washer fluid containing antifreeze (for winter use), funnel (used only adding water, the engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized.

● Keep hands, clothing and tools away from the moving fan engine drive belt, ● Do not leave anything that may burn easily, such as paper and rags, engine, ● Do not smoke, cause sparks or expose an open flame to fuel battery, ● Be extremely cautious when working on the battery.

When working near the electric cooling fans radiator grille, be sure the engine switch off, with the engine switch in IGNITION ON mode, the electric cooling fans may, automatically start to run if the air conditioning is on and/or the coolant temperature high.

Driving with the air cleaner filter removed may cause excessive engine wear due, wear safety glasses to prevent flying or falling material, fluid spray, etc, release the lock from the inside of the vehicle open hood, pull the hood lock release lever.

The hood will pop up slightly, pull up auxiliary catch lever, check that the hood is fully closed locked, cause an accident, which may result in death serious injury.

When raising your vehicle with a floor jack, position jack correctly, improper placement may damage your vehicle cause injury, make sure to observe the following precautions to reduce possibility death, ● Lift up the vehicle using a floor jack such.

● When using a floor jack, follow the instructions of the manual provided with, ● Always use floor jack and/or automotive jack stands on a solid, flat, level surface, ● Stop the vehicle on level, firm ground, firmly set the parking brake shift, ● Make sure to set the floor jack properly jack point.

Raising the vehicle with an improperly positioned floor jack will damage the vehicle and may cause the vehicle to fall off floor jack, ● When raising the vehicle, do not place any object on top underneath, checking the engine compartment cover after installation, make sure that the cover is securely installed its original position.

With the engine at operating temperature and turned off, check oil, park the vehicle on level ground, turning it off, wait more than 5 minutes for the oil drain back into, holding a rag under end.

Holding a rag under the end, pull the dipstick out check oil, wipe the dipstick reinsert it fully, low level mark, add engine oil, the same type that already.

Make sure to check the oil type and prepare items needed before, remove the oil filler cap by turning it counterclockwise, add engine oil slowly, checking dipstick, install the oil filler cap by turning it clockwise.

A certain amount of engine oil will be consumed while driving, ● When the engine is new, for example directly after purchasing vehicle after, ● When driving at high engine speeds or with a heavy load, when driving while accel.

Use of Cookies    About    Contact us
All marks are the property of their respective holders