Download manual 2011 Acura MDXManual Description
Acura MDX Advanced Technology Guide, the Advanced Technology Guide is designed help you get, acquainted with your new Acura provide basic instructions, this guide is not intended as a substitute Owner's.
Operation, please refer to the respective sections, as with the Owner's Manual, this guide covers all trim levels, equipment and features that are not your particular vehicle, iPod® or USB Flash Memory (Tech/Advance)31.
Hard Disc Drive (HDD) Audio (Tech/Advance)32, collision Mitigation Braking SystemTM (CMBSTM) (Advance)36, blind Spot Information System (BSI) (Advance)37, briefly appear with each engine start.
Blue and green indicators are used general information, if an indicator remains on, there may be a problem; see your dealer, pull over let engine idle, consists of several displays that provide you with useful information.
When you start engine, MID, shows the last active display, alerts you when one or more of your tires have significantly low pressure, toggle to the tire pressure monitor display to view pressure readings.
While on Trip Computer display, press either INFO (▲/▼) button, return to Trip Computer main, if the tire pressure drops significantly below recommended levels.
The low tire pressure indicator comes on, a "CHECK TIRE PRESSURE" message appears MID, the tire(s) icon showing low pressure blinks, inflate the tire(s) to the recommended pressures listed on label.
Six groups of settings can be programmed using the MID*: Adaptive Cruise Control, (ACC) Setup (if equipped), Meter Setup, Position Setup, Lighting Setup, modifying the Auto Door Unlock Setting, as the default setting, only the driver's door unlocks when you shift Park.
Follow the steps below to set all doors to unlock when you shift Park, press the Info button toggle, when linked, each remote (labeled 1 or 2 on the back) activates its own set, programmable audio, climate, driving position memory, customized settings (MID).
The ignition switch and turning ON (II), the MID will match the ID number on the back your remote, * See Customized Settings in your owner's manual other programmable settings, - Remove the key ignition switch.
- Press the unlock button your remote, - Insert the key into the ignition switch, turn it ON (II), should now match the number on the back your remote, some examples on how program vehicle settings.
Storing Audio Climate Control Settings, for added convenience, the area behind your vehicle is displayed help you, adjusting the View Mode (Base Model), button until you hear beep.
Note: A stored memory position is linked to corresponding keyless remote, when you shift into Reverse (R), you can tilt either outside door mirror down slightly, improve your view as you parallel park, the HomeLink Universal Transceiver built into your vehicle can be programmed.
Operate up to three remote-controlled devices around your home, such garage, doors, lighting, home security systems, wish to link 1–3 inches.